Midi Control - Source Audio Soundblox Pro User Manual

Expression pedals should have a three-conductor
plug. This type of plug is also referred to as a "stereo plug". Most
expression pedals are this type. The resistance value of the pedal is not
important.

MIDI CONTROL

The Pro can optionally be controlled by an external
MWB
ler such as the Hot Hand MIDI -Exp controller through the
of the knob parameters as well as morphing can be controlled via
Continuous Controller messages. Individual presets can be selected by
Program Change messages. The
MIDI
pass in this way. The following table describes the use of the
implementation:
MIDI
Parameter Message Type
Enable Preset 1 Program Change
Enable Preset 2 Program Change
Enable Preset 3 Program Change
Enable Preset 4 Program Change
Enable Preset 5 Program Change
Enable Preset 6 Program Change
Disable Preset – Bypass Program Change
Parameter Message Type
Drive Continuous Controller
EQ Amount Continuous Controller
Clean Mix Continuous Controller
Distortion Mix Continuous Controller
Morph Control Continuous Controller
The Channel is selectable as a Backpage parameter. Please see the
MIDI
Backpage Parameter section for more details.
18 | MIDI Control
(Tip, Ring, Sleeve)
TRS
control-
MIDI
MIDI input. All
MIDI
Pro can also be put into by-
MWB
input.
MIDI
Data Value
001
002
003
004
005
006
007
Data Value 1 Data Value2
020 0–127
021 0–127
022 0–127
023 0–127
024 0–127
USE WITH HOT HAND
While the primary function of the
MWB
pedal you also have the option of exploring some additional functions
by plugging in a Hot Hand sensor. When a sensor is connected and
enabled, it will control the amount of
drive you can get by moving the sensor is determined by the position
of the knob.
DRIVE
Hot Hand Basics
The Hot Hand motion sensors are sold separately and come in either
wired or wireless versions. Both will work with the
ally, the jack will be compatible with any future Source Audio
SENSOR IN
sensors. The jack duplicates the signals on the
SENSOR OUT
and can be used to daisy-chain multiple pedals together using the same
Hot Hand sensor.
The Hot Hand ring contains a two axis accelerometer that responds
to acceleration and is not based on any type of proximity to the guitar.
By moving your hand or by changing the position of your hand you can
modulate the effect. For a good description of Hot Hand Theory, down-
load the Hot Hand Motion Controlled Wah Filters manual. It is available
at www.sourceaudio.net.
y
x
-
Continued
®
Pro is as a standalone effects
.The maximum amount of
DRIVE
Pro. Addition-
MWB
SENSOR IN
x
y
Hot Hand Ring Sensor
Sold Separately
Use with Hot Hand | 19