Brother S-7220C Instruction Manual page 21

Operator
Green and yellow wire
(ground wire)
S-7220C
<100 V/400 V system>
(1) Power switch
(2) Screws [2 pcs]
4145M
(3) Transformer box
4148M
(4) Transformer box plates [2 pcs.]
(5) Screw [4 pcs (with washer)]
(6) 3-pin power supply connector
(7) Staples [6 pcs.]
(8) Cord clamps [2 pcs.]
(9) Power cord
1. Attach an appropriate plug to the
power cord (9). (The green and
yellow wire is the ground wire.)
2. Insert the
properly-grounded electrical outlet.
NOTE:
Take care when tapping in the
staples (7) to make sure that they do
not pierce the cords.
Do not use
otherwise
problems may result.
4150M
2. INSTALLATION
power plug into a
extension cords,
machine operation
12