Lower the tab (6).
Push in securely until the tabs (6) engage.
<Closing the cover>
Raise the tab (6).
(1) 6-pin head detector unit connector
(2) 12-pin operation panel connector
(3) 10-pin resolver connector
(4) 14-pin machine connector
(5) 4-pin motor connector
2. Binding the cords
(1) Repeat cable tie
Bind the cords in such a way that the
connector does not get pulled out.
All cords that come out from the
control box should be secured to the
cord holder (2) using the repeat
cable tie (1), otherwise vibration from
the sewing machine may cause the
which can cause problems with the
operation of the control box.