Brother S-7220C Instruction Manual page 20

2. INSTALLATION
Operator
11
Green and yellow wire
(ground wire)
S-7220C
<200 V system>
(1) Power switch
(2) Screws [2 pcs]
4145M
(3) 3-pin power supply connector
4600M
(4) Power cord
(5) Staples [5 pcs.]
1. Attach an appropriate plug to the
power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert the
properly-grounded electrical outlet.
NOTE:
Take care when tapping in the
staples (5) to make sure that they do
not pierce the cords.
Do not use
otherwise
problems may result.
4147M
power plug into a
extension cords,
machine operation