Bischoff & Bischoff Pyro start plus+ Operating Manual page 41

Pyro start
plus+
a) Care instructions
Cleaning of the seat and back covers can be undertaken
with warm water and a sponge or soft brush. For stubborn
stains, standard detergent can be added to the water.
Please note: Never use aggressive cleaning agents such as
solvents, abrasive agents or hard brush.
Plastic parts can best be cleaned with a standard plastic
cleaner. Take note of the product information on the clea-
ning agent.
Due to the high-quality surface coating, optimum corrosi-
on protection has been achieved. Should the coating be
damaged by scratches or similar, you can make good the
defective area with a paint pen. Chrome parts are initially
wiped with a dry cloth. Dull areas and stubborn dirt can be
removed most easily with the appropriate standard clea-
ning agent.
Bischoff & Bischoff GmbH • 27.08.2012 41