2. Important safety instructions and the length of lower leg. Protego is intended both for indoor and outdoor use. 2.1. General safety instructions The wheelchair is offered in two models, Protego and Protego SL.
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | intended purpose. • Please note, the frame and pad parts may cool down significantly • When adjusting the wheelchair and selecting the desired positions in winter. If possible, do not park the wheelchair outdoors in cold of the chair, please be aware of the risk that body parts can weather..
It is not suitable to use the wheelchair as a disability aid when a • The maximum load is 130kg for Protego and 150 kg for Protego SL. patient has: • inability to sit 2.5.
3.1. Inspection on delivery Model: Protego SL EAN 13 The Protego wheelchair is delivered fully assembled in cardboard box. After unpacking, please retain the carton if possible. It can be used to store or return the wheelchair at a later stage.
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | 4. Assembly and adjustments 4.2. Foot plates You can carry out the adjustments of your wheelchair yourself with a • The length of the support for the lower leg is fully adjustable.
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | 4.5. Seat • Loosen the handwheel. Pull the legrests until they are in the desired position (Fig. 9). • Re-tighten the handwheel. Seat width • This is how you can put the legrests in any desired position.
Seat depth (only for the SL model) • Place the seat padding back on the seat. There are three settings for adjusting the seat depth of the Protego SL 4.5.1. Adjustments for the SL model model. The Protego SL wheelchair offers you additional adjustment options Loosen the screws for the gas pressure spring located underneath the for the seat depth and seat height.
0° bis 15° (Fig. 22) • However, the angle between the backrest and the seat will remain There are three settings for adjusting the seat height of the Protego SL model. unchanged • On the left push handle there is a release lever which has to be Loosen the screw of the gas pressure spring (Fig.
“ are fitted as standard • You can then slide the braking system along the mounting into the on your Protego. Pneumatic tyres are available as an option. If they correct position. become worn or defective, the authorised mobility dealer should be •...
When refitting the wheel, simply push the wheel back onto the mount. At the same time, press in the locking button as wel. As an option, the Protego can be equipped with a drum brake, which should only be operated by an attendant person via the brake lever on When attaching, make sure that the floating axle is inserted right up the push handles.
Use the frame on the anti-tippers as a tipping lever. Always use the anti-tip wheels in pairs.. 4.17. Head rest • The Protego wheelchair is equipped with a headrest; its angle, • The anti-tipping protectors, known as anti-tippers, prevent the height and depth can be adjusted.
Repeat this procedure on the other side. Always make sure that the • The Protego wheelchair can be equipped with a seat belt for the push handles are set at the same height. There is a scale located on the pelvis.
Risk of entrapment! • First fold the foot plates up or remove the leg rests. • Move the Protego and the current or intended seat together front to front if possible and decelerate the Protego 5.1. Entering and leaving from the •...
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | • When going down any stairs, the helper who is below brakes by To get over obstacles more easily, the assisting person must position pushing the wheelchair right against the steps. The helper above...
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | 6. Technische Daten Protego and Protego SL Dimensions Protego Protego SL Dimensions Total length with leg rests 1200 Position of the rear axle 90 mm behind the backrest...
PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | 7. Transport Stability Protego und Protego SL Static uphill (°): 3,8 (with the brakes on) You can determine whether or not your wheelchair is approved for use 7,4 (brakes off) as a seat in a vehicle for transporting disabled people by referring to...
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | for transporting disabled people and the restraint system. Anchored performance, inform your specialist dealer immediately and do not 4-point restraint systems must be used to secure the wheelchair in the use the wheelchair.
Multifunctional wheelchair | 10. Use by others 13. Warranty The Protego is appropriate for use by others. For use by others, the Guarantee items refer to all defects of the wheelchair which can wheelchair must first be thoroughly cleaned and disinfected according demonstrably be referred to material defect or manufacturing defect.
Page 22
PROTEGO / SL PROTEGO / SL | Multifunctional wheelchair Multifunctional wheelchair | Notizen Garantie Urkunde Model: Protego / Protego SL Model number: Serial number* * (must be described by the mobility dealer) Dealer: Date and seall (Please note our general business terms and condotions) *Information sign can be found on the side frame Bischoff &...
Need help?
Do you have a question about the Protego and is the answer not in the manual?
Questions and answers