In Case Of Crash - Hipod JS7A/2010 Instructions For Installation & Use

INStAllAtIoN oF CAr ANChor FIttINg
oNlY USe A 5/16 UNC grAde 5 bolt. IF the bolt IS Not the
CorreCt leNgth the CAr mANUFACtUrer'S hANd book CAN
ProVIde AdVICe oN the CorreCt leNgth bolt.
CHILD RESTRAINTS MUST NOT BE ATTACHED TO UNSOUND
METAL OR TO wOOD, OR SyNTHETIC STRUCTURES. wHEN
DRILLINg 9 MM HOLE DO NOT DRILL THROUgH FUEL LINES,
FUEL TANKS, ELECTRICAL wIRINg, OR RADIO SPEAKERS.
wEBBINg STRAPS MUST BE PROTECTED FROM SHARP
CORNERS AND EDgES. THE ANCHOR FITTINg MUST BE USED
ONLy AS DESCRIBED ABOVE. IT MUST NOT BE HOOKED ONTO
ANy OTHER OBJECT.
VEHICLE INSTALLATION ACCESSORIES
(Available from major restraint retailers
EXTRA ANCHOR KITS: Are available if using the
restraint in additional vehicles.
re-order number: 0038
EXTENSION STRAPS: may be required for vehicles
without a fixed parcel shelf.
re-order number: 0035 (length 300mm) or
0036 (length 600mm)
52
Note: marking on
the top of a grade 5 bolt.
Fig.3.
200mm
min
Centre line of seating position
Front of Vehicle
If your restraint has been involved in a severe crash, you should destroy the restraint even if no damage is
obvious. Some insurance companies offer vehicle insurance which covers or partially covers the replacement of
your child restraint. Contact your insurance company for further details.
Your insurance company may require you to keep the child restraint for assessment,
restraint after a severe crash.

IN CASe oF CrASh

but do not use the child
53