Table of Contents
Advertisement
hoW to INStAll
toddler USe ForWArd FACINg
F. Push to lock the stabilising bar into upright forward facing position. refer to illustration below for location
of Upright Slot.
UPRIgHT MODE
Push to lock
OR RECLINED MODE
Push to lock the stabilising bar into reclined forward facing position. refer to illustration below for location of
Recline Slot.
Push to lock
DO NOT USE RESTRAINT IN FORwARD-FACINg
POSITION wITH THE STABILISINg BAR EXTENDED
OUT THE FRONT OF THE RESTRAINT.
34
locked in Upright Slot
Push into UPrIght Slot to lock
locked in Recline Slot
Push into reClINe Slot to lock
g. Position restraint in forward facing
mode and align restraint centrally to
the chosen seating position.
Some vehicle seat fabrics (particularly
velours) may be damaged by a child
restraint used continuously. We
recommend the use of a messy mat or
thick towel to keep the vehicle seat in
good condition.
h. Fully lengthen seat belt. Insert seat belt
into Child Use seat belt path (identified
by yellow marker), ensuring that the
seat belt is not routed between the
harness and the back of the restraint,
and that the lap part of the seat belt is
below the hooks.
I. engage seat belt buckle and tongue,
ensure to remove all slack from lap part
of seat belt by pulling sash belt. Adjust
the seat belt to hold the restraint firmly
against the vehicle seat. For inertia/
retractable seat belts, allow excess belt
to feed back into retractor.
Note: Seat belt extenders should not be used if the seat belt
is not long enough to secure the child restraint. If they are
used then the buckle tongue must not enter the seating zone.
hoW to INStAll
toddler USe ForWArd FACINg
route lap &
Sash portion
of seat belt
through the
Child Use seat
belt path
Sash Seat belt
ensure lap part
of seat belt is
below the hooks
hook
lap Seat belt
I
35
Hide quick links:
Advertisement
Table of Contents
