Accessories & Features - Hipod JS7A/2010 Instructions For Installation & Use

ACCeSSorIeS & FeAtUreS
the following instructions apply to accessories that may be supplied with this restraint at point of purchase. If
not, a variety of accessories are available from various retailers of Next generation Nursery Products Pty ltd.
In the case of a small baby, accessories are available to improve the installed position of the baby in the
restraint.
PADDED INSERT (if supplied)
the Padded Insert is designed to snugly support the baby for extra comfort (style may vary). Fit recommended
Padded Insert between harness straps and restraint as shown, ensuring insert is lined up or below shoulder
straps.
do not use the Padded Insert in forward facing mode (toddler Use).
SHOULDER PADS (if supplied)
Shoulder Pads may be provided for extra comfort
for baby or child and are easily fitted to the
shoulder harness straps by:
A. At the rear of restraint remove the left hand
harness shoulder strap from metal strap
connector by slipping the strap through the
open slot.
b. Pull the shoulder strap through the shoulder
strap slot in the restraint and cover, then feed
through shoulder pad.
C. refit the shoulder strap through the shoulder
strap slot in the restraint and cover then
re-attach to metal strap connector. ensure
the path of the strap matches the right hand
harness shoulder strap. repeat these steps
to fit shoulder pad to the right hand harness
shoulder strap.
d. Alternatively the shoulder pads may have press
studs for attachment.
44
Padded
Insert
Pocket
POCKETS (if fitted to the cover)
the pockets sewn on the trim are designed for your convenience. they can hold those necessary items that you
need at a moments notice. e.g bottle, face washer, toy etc.
CAUTION: If using the pocket to store filled bottles, please ensure contents are not
contaminated due to prolonged storage.
CANOPy (if supplied)
the Canopy has been designed to shade your child from direct sunlight.
A. Attach the elastic straps at the back of the canopy to the hooks at the rear of the restraint.
b. Attach together the hook & loop sewn on the ends of the hood and on the sides of the trim.
HEAD PILLOw (if supplied)
The headrest is designed to provide extra comfort and head positing and is suitable in Rearward facing only.
Fitting may be by way of slots in the Head Pillow, These need to be used to ensure it stays in position. See page
13 for strap connection instructions.
Head
Pillow
Shoulder
Pads
ACCeSSorIeS & FeAtUreS
45