Hipod JS7A/2010 Instructions For Installation & Use page 11

hoW to INStAll
bAbY USe reArWArd FACINg
IMPORTANT:
If using an extension Strap, positioning the Attachment Clip above the baby may lead to injury in an accident
therefore make sure that the Attachment Clip is not positioned in front of the vehicle seat.
Attachment Clip should not
be in front of the vehicle seat
front.
20
Attachment Clip should be
behind the front of the vehicle
seat front.
extension Strap
Attachment Clip
ANgULAR ADJUSTMENT OF RESTRAINT
Some vehicle seats have more rearward slope than others. If the angle of the seat causes the baby to be too
upright for comfort, the angle may be altered by placing a firm packing between the seat and the underside of
the base. Packing can be a firmly rolled up towel or nappy.
do not remove all of the rearward slope by over packing. Always leave a rearward slope angle of approximately
10 to 15 degrees as shown below.
10° to 15°
hoW to INStAll
bAbY USe reArWArd FACINg
21