Hipod JS7A/2010 Instructions For Installation & Use page 24

ACCeSSorIeS & FeAtUreS
MESSy MAT™ SEAT PROTECTOR (If supplied)
Place ribbed or pocket end of the messy mat™ seat protector
on edge of car seat, smooth back toward seat join ('A') and fit in
any excess messy mat™ into the join of the car seat ('A').
CAUTION:
the pocket is only for small, light items. do Not overload
the pocket with heavy, bulky items as this may damage
the pocket or cause passengers to trip over them.
46
Short Messy Mat™
TOyBAR (IF SUPPLIED)
the toybar accessory is only for use on this product in rear facing
(baby) mode. It must be removed before the restraint is converted to
forward facing (child) mode. do not hang addition toys on to the toybar,
as it is designed and tested only with the toys supplied.
1. to fit toybar, line up the end moulding in the recess (as shown) and
A
Long Messy Mat™
2. When toybar is fitted, the tether strap must be fitted through the
A
3. to remove the toybar, push down on the release catch (A) and pull
NEVER use the toybar in forward facing mode (toddler Use).
push in until it clicks (and locks) in place. do this for both sides.
loop of the toybar as shown.
the retainer (b) out. do this for both sides. Store the toybar in a
safe place when not in use.
ACCeSSorIeS & FeAtUreS
A
B
47