Table of Contents
Advertisement
43. Locate the wiper and upper wire strike as well as its
relative hardware.
44. Install the wipers, upper wire strike and antennas
in front of the windshield as photo shown.
45. Install the lower antennas as well as the lower wire
strike.
46. Assemble the external hoist mount first then secure
the hoist on the mount with the mounting strip and four
2x6mm self-tapping.
47. Next install the hoist assembly on the fuselage as
photo shown.
48. Trim all windows and both sand the glue area on
windowsand fuselage.
properly. You mayskip installing the middle window for
engine adjustment and any maintenance of helicopter.
14
Epoxy the windows in place
Advertisement
Table of Contents
