Power Supply - Sanyo MCD-S670F Instruction Manual

I
POWER SUPPLY
I
o
0
0 0
1
(
Im!!!x
P":'GE"i"El
———
Install batteries.
Observe + and - signs.
8 "D" size batteries
Replace lid.
——— —.
lIC power operat
———
Take out the cord and
connect it.
NOTES:
When the mains lead is connected to the unit,
the installed batteries will be automatically
disconnected.
- The FUNCTION switch is mounted on the
secondaw side. The unit is not disconnected
from mains, even switched off.
CAUTION:
WHEN INSTALLING THE BATTERIES
To prevent leakage from the batteries, which is
corrosive and can cause personal injury and
damage to the unit, observe the following pre-
cautions:
1. The batteries must be installed correctly.
Match the polarities (+ and - signs) on the
batteries, to the polarities shown on the
back of the unit.
2. Do not mix new batteries with old or used
batteries.
3. Only use batteries of the same type and
brand.
4. If the unit will not be used for an extended
period of time, remove the batteries and
store them in a cool place.
5. Carefully follow the battery manufacturer's
instructions for proper use and disposal.
6. DO NOT ALLOW YOUNG CHILDREN TO
HANDLE BATTERIES.
NOTE:
When the batteries have become dis-
charged, they must be disposed of in a safe
manner that complies with all applicable
laws.