Power Supply - Sanyo MCD-Z12F Instruction Manual

POWER SUPPLY
1
'0"-
1
—— —— —
Battery power operation
I
AC power operation
——— ——— —
—— —— —
Install batteries.
Take out the cord and
Observe + and – signs.
connect it.
AC INPUT
8
"D"
size batteries
Replace lid.
CAUTION:
WHEN INSTALLING THE BATTERIES
To prevent Ieakagefrom the batteries, which is
corrosive and can cause personal injury and
damage to the unit, observe the following
precautions:
1. The batteries must be installed correctly.
Match thepolarities(+ and – signs) on the
batteries, to the polarities shown on the
back of the unit.
2. Do not mix new batteries with old or used
batteries.
3. Only use batteries of the same type and
brand.
NOTE:
When the mains lead is connected to the unit,
the installed batteries will be automatically
disconnected.
The FUNCTION switch is mounted on the sec-
ondary side. The unit is not disconnected from
mains. even switched off.
4. If the unit will not be used for an extended
period of time, remove the batteries and
store them in a cool place.
5. Carefully follow the battety manufacturer's
instructions for proper use and disposal,
6. DO NOT ALLOW YOUNG CHILDREN TO
HANDLE BATTERIES.
NOTE:
When the batteries have become
discharged, they must be disposed of in a
safe manner which complies with all
applicable laws.
-2-