Download  Print this page

Battery Power; Power Supply; General Operation; Adjusting The Volume - Sanyo MCD-UB575M Instruction Manual

Hide thumbs

Advertisement

AC POWER
Connect one end of the mains lead to the AC
INPUT ~ socket and the other end to an AC outlet.
Note:
-
The installed batteries are automati-
cally disconnected when the mains lead is
connected to the unit.
-
The FUNCTION switch is mounted on
the secondary side. The unit is not discon-
nected from mains, even switched off.

BATTERY POWER

Installing batteries
Install eight "D/R20" batteries (not supplied) as
shown below.
1.

Adjusting the volume

Turn the VOLUME control.
Bass expander button
Press the BASSXPANDER button to Z ON to
enhance the bass sound.

POWER SUPPLY

Caution on batteries
To prevent battery electrolyte leakage, which may
result in injury and damage to the unit or other
objects, observe the following precautions:
1. All batteries must be installed with the proper
2. Do not mix new with old or used batteries.
3. Only use batteries of the same type and brand.
4. Remove the batteries when they are not to be
5. When the batteries have become discharged,
2.

GENERAL OPERATION

Headphones
Connect stereo headphones (not supplied) to the
PHONES socket for monitoring or for private
listening. The speakers are automatically
disconnected when headphones are connected.
-4-
polarity (see diagram on the rear of the unit).
used for a long period time.
they must be disposed of in a safe manner
which complies with all applicable laws.
3.

Advertisement

loading

  Also See for Sanyo MCD-UB575M

  Related Manuals for Sanyo MCD-UB575M