Download Print this page

Power Supply - Sanyo MCD-S870F Instruction Manual

Hide thumbs

Advertisement

I
POWER SUPPLY
I
~attery
pow+r6pFraToFJ
———
———
———
Install batteries.
Observe + and - signs.
8 "D" size batteries
@
.*.::.
Replace
lid.
CAUTION:
WHEN INSTALLING
THE BATTERIES
To prevent leakage from the batteries, which
is corrosive and can cause personal
injury
and damage to the unit, observe the following
precautions:
1. The batteries must be installed correctly.
Match the polarities (+ and - signs) on the
batteries, to the polarities
shown on the
back of the unit.
2. Do not mix new batteries with old or used
batteries.
3. Only use batteries of the same type and
brand.
——
——
——
.
[AC Dower oDeration
I
Take out the cord and
connect it.
-+
~
230-240
V AC,
50 Hz
<
NOTES:
When the mains lead is connected to the
unit, the installed batteries will be automati-
cally disconnected.
The FUNCTION switch is mounted on the
secondary
side. The unit is not discon-
nected from mains, even switched off.
4. If the unit will not be used for an extended
period of time, remove the batteries and
store them in a cool place.
5. Carefully follow the battery manufacturer's
instructions for proper use and disposal.
6. DO NOT ALLOW YOUNG CHILDREN TO
HANDLE BATTERIES.
NOTE:
When the batteries
have become
dis-
charged,
they must be disposed
of in a
safe manner which complies with all appli-
cable laws.

Advertisement

loading

  Also See for Sanyo MCD-S870F

  Related Manuals for Sanyo MCD-S870F