AC power operation
Connect one end of the mains lead to [AC INPUT] socket and the other end to an AC outlet.
When the mains lead isconnected
the installed batteries will beautomatlcally
The FUNCTION switch is mounted on the secondary side. The unit
even switched off.
Battery power operation
Open the battery compartment
lid by pushing down on the tabs.
Install 8 "C" size batteries (not supplied), Refer to the polarity diagram on the back of the unit. Match
the (+) and (-) marks on the diagram to the (+) and (-) marks on the batteries. (Fig. 2)
Replace the lid.
To prevent battery electrolyte
leakage, which may result in injury and damage to the unit or other
objects, observe the following precautions:
All batteries must be installed with the proper polarity (see diagram on the back of the unit).
Do not mix new with old or used batteries.
Only use batteries of the same type and brand.
Remove the batteries when they are not to be used for a long period time.
Insert the m;niplug from a pair of headphones
into the [PHONES]
socket. When the
are plugged in, speakers are automatically
ON (Button in):
Increases the bass output level.
OFF (Button out):
For normal bass output level.
Select the desired radio band with [BAND].
Tune in a desired station by turning
The unit will automatically
switch to stereo when an FM stereo broadcast is received.
[TONE] and [BASSXPANDER]
For FM reception, pull out the telescopic aerial and determine the direction, length and angle for optimum
For AM reception, the aerial inside the unit is somewhat directional,
rotate the unit to improve AM reception.