Cleaning - Husqvarna PT-26D Operator's Manual

WARNING:
No service operations may be performed on the
engine or cutting unit unless:
• The engine is stopped.
• The parking brake is on.
• The ignition key has been removed.

Cleaning

Clean the machine directly after use. It is much easier
to wash off grass cuttings before they dry.
Oily dirt can be removed using a cold degreasing
agent. Spray a thin layer and wait a few minutes.
Rinse at normal water pressure. Do not direct the jet
towards electrical components or bearings.
Do not rinse hot surfaces, for example, the engine and
exhaust system.
Clean the machine immediately after use
Maintenance
8009-755
77