Chronometer; Warning Lamps - Husqvarna PT-26D Operator's Manual

Presentation
37

Chronometer

.
The chronometer shows how many hours the engine
has been running. Any time when the engine is not
running but the ignition is switched on is not registered.
The last digit shows tenths of an hour (6 minutes).

40-52. Warning lamps

On the steering wheel console under the steering wheel
there are warning lamps for battery charging (40),
differential lock (41), coolant temperature (42), glow
plug heating (43), oil pressure (44), cutting unit
operation (45), parking brake (46), high speed (47), full
beam (51) and indicators (48, 52).
During start-up all lights come on for function checks.
The most important lights are coolant temperature and
oil pressure. The engine stops automatically if any of
these light up.
The lamp for the coolant temperature flashes at
o
approximately 100 C and lights constantly at
o
approximately 110 C when the engine stops.
Reduce the load to lower the temperature if the lamp
flashes.
The warning lamps are LEDs, which cannot be
replaced separately. The entire indication panel must
be replaced in the event of a fault.
48

Chronometer

Warning lamps
8043-058
8009-909