Chapter 6:Maintenance; Maintenance Schedule - Husqvarna PT-26D Operator's Manual

Chapter 6: Maintenance
It is good practice to always check for leaks and loose components after use. Also check the machine and listen for
knocking sounds. During hard use and in extreme conditions, the service intervals should be reduced.
Check the cooling system's antifreeze before the Winter.

Maintenance Schedule

The following is a list of maintenance procedures that must be performed on the machine. Paragraphs that are
marked with footnote number 4, see an authorised service workshop.
=
Described in this manual
=
Not described in this manual.
Maintenance
Check for fuel and oil leaks
Check the safety switch, seat
Check the safety switch, pedal
system
Check the engine oil level (at every
refuelling)
Check the hydraulic oil level
Page Daily main- Weekly
tenance main-
tenance
befor after
-
93
93
117
122
Maintenance interval hours
250 500 1000
Maintenance
2000 3000
71