Husqvarna PT-26D Operator's Manual page 43

Presentation
Pull the lever backward to engage the transport position.
The unit is then raised.
The cutting unit can be raised slightly with the blades
in operation. This is to facilitate work when cutting in
extremely tall grass or on uneven surfaces. The
machine is, however, equipped with an automatic
blade stop function, which is activated when the
cutting unit reaches the transport position. If the
automatic blade stop is activated, the switch (22) must
be pressed in and pulled out to restart.
Lowering the unit (mowing position)
Move the lifting lever forwards to engage the cutting
position. The unit is then lowered. The lever does not
need to be held in position, allow it to spring back to
the zero position when the unit has been lowered.
The blades are started with the switch for driving the
cutting unit (22).
Weight transfer can be activated, which means the cutting
unit follows the ground contour and unevenness on the
lawn more precisely. See "Weight transfer" page 46
Other functions (option)
8043-040
When the lever is moved laterally, the oil pressure is
Mowing Position
operated to the 2nd hydraulic function, the terminals
are under the foot plate hatch.
41