Starting The Engine - Husqvarna PT-26D Operator's Manual

Starting the engine

1. Apply the parking brake by pulling up the lock
handle (36) and pressing down the pedal (3).
The engine cannot be started if the parking brake
is applied or if a driving pedal is pressed.
Check that the switch for the cutting unit drive is
depressed. If the engine starts with the switch
pulled out, it must be pushed in and pulled out
again in order for the cutting unit to work.
2. Move the speed control to the max speed position
so the injection pump is set to full feed mode.
Apply the parking brake.
Engine speed control in max. speed position
Driving
8043-045
8043-007
61