Table of Contents
Advertisement
Server Configurations
The following illustrations show some single-frame configurations available.
Typical Server Configuration
A typical server configuration can consist of 1 to 16 nodes and a 350 V bulk power subsystem. When
options are installed (integrated battery feature and I/O subsystems), the number of nodes is reduced. An
I/O drawer can be installed in any rack position. A maximum of five I/O subsystems can be installed. A
maximum of six integrated battery feature (IBF) units can be installed.
1 7040 Model W42 Bulk Power Subsystem
2 pSeries 655 Processor Subsystem
OR
7040 Model 61D I/O Subsystem
3 7040 Model W42 IBF
4 pSeries 655 Processor Subsystem
OR
7040 Model 61D I/O Subsystem
OR
7040 Model W42 Integrated Battery
Feature (IBF)
5 - 6 Hardware Management Console for
pSeries (HMC)
1
2
3
4
2
= Minimum configuration items
v Various configurations are possible (16 processor
subsystems maximum).
v Five or six processor subsystems maximum with five I/O
drawers installed.
Fifth and sixth (optional) IBF. Drawer location for the IBF is
fixed.
This drawer may contain one or two processor subsystems
OR
One I/O subsystem
OR
One, two, or four IBFs.
One standard; one optional
7
7
Appendix D. pSeries 655 Description and Overview
5
6
127
Advertisement
Table of Contents
