Table of Contents
Advertisement
1 Weight Distribution Plate
2 Bushing
3 Leveler Feet
4 Jam Nut
5 Spacer
6. To align the plates to the system rack, do the following:
a. Install the spacers (item 5), washers (item 6), and bushings (item 2).
b. Place the four mounting bolts (item 9) and washers (item 8) through the plate assembly holes at
the bottom of the rack.
c. Position the plates under the four mounting bolts so that the mounting bolts are centered directly
over the threaded holes.
d. Place the bushings under the leveler feet (item 3)
e. Turn the mounting bolts three or four rotations into the threaded holes.
1
9
8
7
6
5
4
3
2
1
6 Washer
7 Bushing
8 Washer
9 Bolt
Appendix F. Securing the Rack
151
Advertisement
Table of Contents
