Rio Cables; Hmc To Processor Subsystem Cables - IBM pseries 655 Installation Manual

Cable from Cable to
Power Subsystem
Subsystem (Processor or
Connector I/O Location
Code)
Notes:
1. P10 connector is not used.
2. Cable clamp (part number 11P4606) is used with all cables.
3. Cable hook-and-loop fastener (part number 07H6655) is used with all cables.

RIO Cables

The following table lists the cables used to connect the RIO or RIO-2 connectors on the processor
subsystem to the I/O subsystem input/output connectors.
Part Number
11P2355
53P5242
53P5243
11P0272
44H9137
00P5238
00P5239
21P5477
53P5454
53P2675
53P2676

HMC to Processor Subsystem Cables

The following table lists the cables used to connect the HMC to the processor subsystem.
Part Number
44P0205
44P0206
44P2237
44P2238
44P2239 (for BPC A)
44P2240 (for BPC B)
158 Eserver pSeries 655 Installation Guide
Power
Subsystem
Cable Part
Number
Cable Length
6 m (19.7 ft)
15 m (49.2 ft)
6 m (19.7 ft)
6 m (19.7 ft)
15 m (49.2 ft)
15 m (49.2 ft)
Connector Description
Description
RIO cable, 0.5 m (19.7 in.)
RIO to RIO-2 cable, 1.0 m (3.2 ft)
RIO to RIO-2 cable, 3.0 m (9.8 ft)
RIO cable, 2.0 m (6.6 ft)
RIO cable, 15.0 m (49.2 ft)
RIO-2 cable, 1.75 m (5.7 ft)
RIO-2 cable, 2.5 m (8.2 ft)
RIO to RIO-2 cable, 6.0 m (19.7 ft)
RIO-2 to RIO-2 cable, 1.0 (3.2 ft)
RIO-2 to RIO-2 cable, 8.0 m (26.2 ft)
RIO-2 to RIO-2 cable, 3.5 m (11.5 ft)
Connector Description
9 Pin to 9 Pin
9 Pin to 9 Pin
25 Pin to 9 Pin mini D-Shell
25 Pin to 9 Pin mini D-Shell
25 Pin to 9 Pin mini D-Shell
25 Pin to 9 Pin mini D-Shell
Type of Cable
RS 232
RS 232
RS 422
RS 422
RS 422
RS 422