Table of Contents
Advertisement
Navi Bars
Control folder
General
You can programme the Mediamaster to turn on and off at a se-
lected time on a selected channel, in conjunction with the timer
setting on your VCR.
A useful example of this function is:
If you go out and want to record different programmes on differ-
ent channels at different times you set the timer on the Media-
master to change to those selected channels.
Remember you must set the timer on your VCR in order to make
the recordings.
This function can be used for up to 8 different settings, on dif-
ferent dates, times and channels in conjunction with the capabili-
ties of your VCR'S timer.
Note! The timer function only works when the receiver is in
standby.
Timer setup
• Press select to enter the Timer setup menu.
• First, select Channel List with the
• Then, step to Channel to select the desired TV/Radio channel.
• Set the date using the numerical buttons on your remote con-
trol (dd/mm/yy).
• If you enter a wrong digit you can erase it with the
• Set the start and stop time using the numerical buttons on your
remote control.
The different start times may never overlap each other. If you try
to enter a start or stop time within an already occupied period of
time you will get a warning message.
• Press select to save or back to cancel.
• Press back twice to leave the Navi Bars and return to view-
ing mode.
• Press and hold
Up to 8 different events can be predefined. The events will be
sorted in start time order.
At each stop time the box will return to standby.
You can erase a predefined event by pressing the
• Press back to cancel the deletion and select to delete the
event.
Control folder
In the menu you find general information about which hardware
and software version your Mediamaster is running on.
GB 18
☛
Timer
to put the Mediamaster in standby.
☛
System info
buttons.
button.
button.
Advertisement
Table of Contents
