Preparing The Remote Control - Nokia Mediamaster 9600C Owner's Manual

Connecting to a Hi Fi system
• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA
input sockets on your Hi Fi system.

Preparing the remote control

• Remove the cover on the battery compartment at the bottom
of the remote control handset.
• Insert the 2 x AAA (1,5 V) batteries, as shown in the diagram,
taking care to observe the + and - markings indicated inside.
• Replace the cover.
Switching on for the first time
You can now plug in the mains plug of the Mediamaster to the
wall socket.
• Switch on your TV set.
• When the Mediamaster is connected to the TV set, you will
now see a welcome message on the screen. You may now
proceed to page 10 "Basic Settings".
However, we recomend that you read the other information
on the preceding pages first.
Before you continue...
please read this concerning menus
A menu is a field of text shown on the TV screen. These menus
contain different kinds of information and give the possibility to
select between alternatives.
In the bottom part of the screen you will normally also have a
short explanation of your options.
A menu may contain several lines. Selectable lines are high-
lighted. Non highlighted lines are not selectable.
GB 7