This Introduction Guide describes how to connect the Mediamaster and how to perform the first-time installation. It also describes the main features of the product. A more detailed User Guide in the English language is available from the Nokia.com support pages on the Internet.
Remote control This section describes how to operate the Mediamaster using the buttons on the remote control. mute Press once to turn the sound off/on (mute/unmute). Press and hold for a few seconds to switch the Mediamaster into standby mode. In addition, press this button to switch the Mediamaster on.
Connecting the Mediamaster Front and Rear panel antenna cable for connection of the antenna cable Slot to the cable TV antenna socket Reset button for an Irdeto smart card TV SCART socket * * for connection to the TV SCART DC in TV/VCR Digital audio...
In this section, you will see some of the most common ways to connect your equipment. If you have problems with your connections and need help, contact your retailer or Nokia Support Connecting to the TV with SCART • Connect an antenna cable from the cable TV antenna socket in the wall to the antenna cable input on the Mediamaster.
Connecting the Mediamaster Connecting a Video recorder with SCART • Connect an antenna cable from the cable TV antenna socket in the wall to the antenna cable input on the Mediamaster. • Connect a SCART cable between the main SCART socket on the TV and the TV SCART socket on the Video.
Connecting the Mediamaster & First-time installation About Smart card The Mediamaster is equipped with a built-in decoder for the Irdeto encryption system. Insert a valid smart card fully into the slot on the back of the Mediamaster. The gold chip must face downwards and inwards. Connecting a Hi-fi system It is possible to connect a TOS link cable from the Digital audio out- put on the Mediamaster to a Hi-fi system that is equipped with the...
First-time installation Language Select the desired menu language using the cursor up/down but- ton. This will now become the main language for audio and subtitling. When you now press ok again to confirm your choice of language, you simultaneously start the searching for TV/Radio channels. Channel search Enter the valid values for the local network where your Media- master is connected.
Watching TV & listening to the radio Navigating with the Navi Bars Navi Bars Navi Bars are used for selecting TV/Radio channels and to enter Bookmark name Bookmark menus in which you can perform different settings. 1. Display Navi Bars by pressing the navi or ok button; to hide them, press the back button.
Watching TV & listening to the radio The Options Menu When Navi Bars is shown on the screen, press opt to open the option menu from where you can get programme information, add a favorite folder and more. Programme information Will show technical information about the TV/Radio channel in the focus.
Watching TV & listening to the radio Edit name From here you can change the name of an existing folder. The pro- cedure is the same as when you first created the folder. Please note that the system folders (All TV/Radio, Settings, Games) cannot be edited.
Watching TV & listening to the radio Delete bookmark Delete the channel bookmark in the focus area. Please note that bookmarks in the System folders(All TV/Radio, Set- tings, Games) cannot be deleted. Bookmark selection mode From the Bookmark selection mode you can mark several channel bookmarks at the same time.
Watching TV & listening to the radio Programme Guide: EPG By pressing the info button three times while watching a channel you get access to the Mediamaster EPG (Electronic Programme Guide.) In the EPG you will find information about the programmes for the current day and for the following seven days (provided that this information is included in the channel transmission from the distributor.)
Technical specifications Supply voltage for the TV SCART separate Power Supply 110-240V AC, 50-60Hz Video output 75 Ohm From thePower supply to the Audio output 0.5 V >10 Ohm 16 V RGB output Internal RGB Power consumption max RGB bandwidth 5.8 MHz ±3 dB Power consumption in standby...
This Software Agreement (“Agreement”) is between You (either an individual or an entity), the End User, and Nokia Corporation Multimedia, (“Nokia”). The Agreement authorizes You to use the Software specified in Clause 1 below and which is included in this Nokia digital TV receiver. This is an agreement on end-user rights and not an agreement concerning sale.
Nokia is a registered trademark of Nokia Corporation www.nokia.com 00032805.01...