Table of Contents
Advertisement
12 www.aeg.com
temperature first. Then you can set the
clock function.
• You can use Duration and End Time at
the same time if you want to automati-
cally activate and deactivate the appli-
ance at a given time later.
7.2 Extra Time
The Extra Time makes the heating func-
tion continue after the Duration ends.
• Applicable to all heating functions
with Duration or Weight Automatic .
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. The recipes are fixed and you
cannot change them.
Activating the function:
1.
Activate the appliance.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Installing the accessories
All accessories have small inden-
tations at the bottom of the right
and left edges to increase the
safety.
• Not applicable to heating functions
with the core temperature sensor.
Activating the function:
1.
When the cooking time ends, an
acoustic signal sounds. Press a sen-
sor field.
2.
The display shows the message for
Extra Time .
3.
Press
to activate or OK to cancel.
4.
When Extra Time is set on an addi-
tional minute appears.
2.
Select the Assisted Cooking menu.
Press OK to confirm.
3.
Select the category and dish. Press
OK to confirm.
4.
Select Recipe Automatic . Press OK
to confirm.
When you use the Manual func-
tion, the appliance uses the auto-
matic settings. You can change
them as with other functions.
Wire shelf:
Put the shelf in and make sure that the
indentations point down.
Push the shelf between the guide bars of
the shelf support.
Always make sure that these indenta-
tions are at the rear of the appliance.
These indentations are also an anti-tip
device.
Advertisement
Table of Contents
