Clock Functions - AEG KS8400501 User Manual

Hide thumbs Also See for KS8400501:
Table of Contents

Advertisement

Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.6 Energy saving
The appliance contains features
which help you save energy
during everyday cooking:
• Residual heat:
– When the heating function or pro-
gramme operates, the heating ele-
ments are deactivated 10% earlier
(the lamp and fan continue to oper-

7. CLOCK FUNCTIONS

7.1 Clock functions
Symbol
If you set the time for a clock function,
the time starts to count down after 5 sec-
onds.
If you use the clock functions Du-
ration and End Time , the appli-
ance deactivates the heating ele-
ments after 90% of the set time.
The appliance uses the residual
heat to continue the cooking
procedure until the time ends.
The residual heat can last from 3
to 20 minutes.
Setting the clock functions:
1.
Set a heating function.
Function
To set a countdown (maximum: 2 hours, 30 mi-
nutes). This function has no effect on the operation
of the appliance. You can also activate it when the
Minute Minder
appliance is deactivated. Touch
function. Touch
OK to start.
To set the length of an operation (maximum: 23
Duration
hours, 59 minutes).
To set the switch-off time for a heating function
End Time
(maximum: 23 hours, 59 minutes).
ate). For this feature to operate, the
cooking time must be longer than
30 minutes or you must use the
clock functions ( Duration , End
Time ).
– When the appliance is off, you can
use the heat to keep food warm.
The display shows the remaining
temperature.
• Cooking with the lamp off - touch
and hold
for 3 seconds to deacti-
vate the lamp during cooking.
• Eco functions - refer to section "Heat-
ing Functions" (for selected models
only).
Description
or
to set the minutes and
2.
Touch
again and again until the
display shows the necessary clock
function and the related symbol.
3.
Touch
or
ry time. Touch OK to confirm.
When the time ends, an acoustic sig-
nal sounds. The appliance deacti-
vates. The display shows a message.
4.
Touch a sensor field to stop the sig-
nal.
Useful information:
• With Duration and End Time , the ap-
pliance deactivates automatically.
• With Duration and End Time , you
must set the heating function and the
ENGLISH
11
to activate the
to set the necessa-

Advertisement

Table of Contents
loading

Table of Contents