Default Network And Bearer Used By Push Proxy Gateway - Kannel WAP and SMS gateway User Manual

Default network and bearer used by push proxy gateway

If network and bearer attributes of the pap control document are missing or set any, Kannel uses address
type for routing purposes: if the address type is a phone number (TYPE=PLMN), network defaults to
GSM and bearer to SMS; if it is a IP-address (TYPE=IPv4), network defaults to GSM and bearer to
CSD. So following minimal pap document works:
<?xml version="1.0"?>
<!DOCTYPE pap PUBLIC "-//WAPFORUM//DTD PAP//EN"
<pap>
<push-message push-id="9fjeo39jf084@pi.com">
<address address-value="WAPPUSH=+358408676001/TYPE=PLMN@ppg.carrier.com"/>
</push-message>
</pap>
"http://www.wapforum.org/DTD/pap_1.0.dtd">
Chapter 7. Setting up Push Proxy Gateway
89