Kannel WAP and SMS gateway User Manual page 43

Variable
wait-ack-expire
flow-control
window
throughput
retry
Value
number
number
number (messages)
number (messages/sec)
boolean
Chapter 5. Setting up a SMS Gateway
Description
Defines what kind of action
should be taken if the the ack of
a message expires. The options
for this value are: 0x00 -
disconnect/reconnect, (default)
0x01 - as is now, requeue, but
this could potentially result in the
msg arriving twice 0x02 - just
carry on waiting (given that the
wait-ack should never expire this
is the mst accurate)
This SMSC can support two
types of flow control. The first
type of flow control is a
protocol, when
stop-and-wait
this parameter equals to '1'.
During the handling of
commands, no other commands
shall be sent before the a
response is received. Any
command that is sent before the
reception of the response will be
discarded. The second type of
flow control is
windowing
when this parameter is unset or
equals '0'. In this case a
maximum of n commands can be
sent before a response is
received.
When using
flow-control=0
emi works in windowed flow
control mode. This variable
defines the size of the window
used to send messages. (optional,
defaults to the maximum - 100)
If SMSC requires that kannel
limits the number of messages
per second, use this variable.
(optional)
Assuming that kannel is well
configured and we had one
sucessful connection, if retry is
true, kannel will always retry the
connection even if some related
error ocur.
,
,
36