Kannel WAP and SMS gateway User Manual page 86

validity
deferred
dlrmask
dlrurl
pid
alt-dcs
rpi
number (minutes)
number (minutes)
number (bit mask)
string (url)
byte
number
number
Chapter 5. Setting up a SMS Gateway
Optional. If given, kannel will
inform SMS Center that it should
only try to send the message for
this many minutes. If the
destination mobile is off other
situation that it cannot receive
the sms, the smsc discards the
message. Note: you must have
your kannel box time
syncronized with the SMS
Center.
Optional. If given, the SMS
center will postpone the message
to be delivered at now plus this
many minutes. Note: you must
have your kannel box time
syncronized with the SMS
Center.
Optional. Request for delivery
reports with the state of the sent
message. The value is a bit mask
composed of: 1: Delivered to
phone, 2: Non-Delivered to
Phone, 4: Queued on SMSC, 8:
Delivered to SMSC, 16:
Non-Delivered to SMSC. Must
set on
dlr-url sendsms-user
group or use the
dlrurl
variable.
Optional. If is given,
dlrmask
this is the url to be fetched.
(Must be urlencoded)
Optional. Sets the PID value.
(See ETSI Documentation). Ex:
SIM Toolkit messages would use
something like
&pid=127&coding=2&alt-dcs=1&mclass=3
Optional. If unset, kannel uses
the alt-dcs defined on smsc
configuration, or 0X per default.
If equals to 1, uses FX. If equals
to 2, force 0X.
Optional. Sets the Return Path
Indicator (RPI) value. (See ETSI
Documentation).
CGI
79