Kannel WAP and SMS gateway User Manual page 24

Variable
box-deny-ip
box-allow-ip
udp-deny-ip
udp-allow-ip
wdp-interface-name (c)
log-file
log-level
access-log
Value
IP-list
IP-list
IP or '*'
filename
number 0..5
filename
Chapter 3. Using the gateway
Description
These lists can be used to
prevent box connections from
given IP addresses. Each list can
have several addresses, separated
with semicolons (';'). An asterisk
('*') can be used as a wildcard in
place of any ONE number, so
*.*.*.* matches any IP.
These lists can be used to
prevent UDP packets from given
IP addresses, thus preventing
unwanted use of the WAP
gateway. Used the same way as
and
box-deny-ip
.
box-allow-ip
If this is set, Kannel listens to
WAP UDP packets incoming to
ports 9200-9208, bound to given
IP. If no specific IP is needed, use
just an asterisk ('*'). If UDP
messages are listened to,
wapbox-port variable MUST be
set.
A file in which to write a log.
This in addition to
stdout
any log file defined in command
line. Log-file in 'core' group is
only used by the bearerbox.
Minimum level of logfile events
logged. 0 is for 'debug', 1 'info',
2 'warning, 3 'error' and 4
'panic' (see Command Line
Options)
A file in which information
about received/sent SMS
messages is stored. Access-log in
'core' group is only used by the
bearerbox.
and
17