Ota Setting Group Variables - Kannel WAP and SMS gateway User Manual

phone as a XML document, but this method is perhaps more suitable for continous provisioning.
If you want to send multiple OTA configurations through the smsbox and you do not want to send XML
documents, you will have to declare a
Table 5-13. OTA Setting Group Variables
Variable
group
ota-id
location
service
ipaddress
phonenumber
speed
bearer
calltype
connection
pppsecurity
authentication
login
secret
A sample 'ota-setting' group:
group = ota-setting
location = http://wap.company.com
service = "Our company's WAP site"
ipaddress = 10.11.12.13
string to the different
ota-id
Value
ota-setting
string
URL
string
IP
phone-number
number
string
string
string
on or off
string
string
Chapter 5. Setting up a SMS Gateway
groups.
ota-setting
Description
This is a mandatory variable
An optional name or id for the
ota-setting. Any string is
acceptable, but semicolon ';'
may cause problems, so avoid it
and any other special
non-alphabet characters.
The address of the HTTP server
for your WAP services, i.e.
http://wap.company.com
Description of the service
IP address of your WAP gateway
Phone number used to establish
the PPP connection
Connection speed: 9600 or
14400. Defaults to 9600.
Bearer type: data or sms.
Defaults to data.
Call type: isdn or analog.
Defaults to isdn.
Connection type: cont or temp.
Cont uses TCP port 9201 and
Temp uses UDP port 9200.
Defaults to cont.
Enable CHAP authentication if
set to on, PAP otherwise
normal or secure. Indicates
wether WTLS should be used or
not. Defaults to normal.
Login name.
Login password
73