Setting Up A Wap Gateway; Wap Gateway Configuration; Wapbox Configuration; Wapbox Group Variables - Kannel WAP and SMS gateway User Manual

Chapter 4. Setting up a WAP gateway
This chapter tells you how to set Kannel up as a WAP gateway.
WAP gateway configuration
To set up a WAP Kannel, you have to edit the 'core' group in the configuration file, and define the
'wapbox' group.
You must set following variables for the 'core' group:
previous chapter about details of these variables.
With standard distribution, a sample configuration file
take a look at that when setting up a WAP Kannel.
Wapbox configuration
If you have set
group.
The simplest working 'wapbox' group looks like this:
group = wapbox
bearerbox-host = localhost
There is, however, multiple optional variables for the 'wapbox' group.
Table 4-1. Wapbox Group Variables
Variable
group (m)
bearerbox-host (m)
timer-freq
variable in the 'core' configuration group, you MUST supply a 'wapbox'
wapbox-port
Value
wapbox
hostname
value-in-seconds
and
wapbox-port wdp-interface-name
is supplied. You may want to
wapkannel.conf
Description
This is mandatory variable
The machine in which the
bearerbox is.
The frequency of how often
timers are checked out. Default is
1
. See
25