Kannel WAP and SMS gateway User Manual page 45

Variable
transceiver-mode
receive-port
smsc-username (m)
smsc-password (m)
system-type (m)
Value
bool
port-number
string
string
string
Chapter 5. Setting up a SMS Gateway
Description
Attempt to use a
TRANSCEIVER mode
connection to the SM-SC. It uses
the standard transmit 'port', there
is no need to set 'receive-port'.
This is a SMPP 3.4 only feature
and will not work on an earlier
SM-SC. This will try a
bind_transceiver only and will
not attempt to fall back to doing
transmit and receive on the same
connection.
The port number for the
RECEIVER connection to the
SMSC. May be the same as port.
Use value 0 to disable this I/O
thread.
The 'username' of the
Messaging Entity connecting to
the SM-SC. If the SM-SC
operator reports that the
"TELEPATH SYSTEM
MANAGER TERMINAL" view
"Control.Apps.View" value
"Name:" is
"SMPP_ZAPVMA_T" for the
transmitter and
"SMPP_ZAPVMA_R" for the
receiver the smsc-username value
is accordingly "SMPP_ZAP".
Note that this used to be called
system-id (the name in SMPP
documentation) and has been
changed to smsc-username to
make all Kannel SMS center
drivers use the same name.
The password matching the
"smsc-username" your
teleoperator provided you with.
Usually you can get away with
"VMA" which stands for Voice
Mail Activation.
38