Kannel WAP and SMS gateway User Manual page 46

Variable
interface-version
address-range (m)
our-host
my-number
enquire-link-interval
max-pending-submits
Value
number
string
string
number
number
number
Chapter 5. Setting up a SMS Gateway
Description
Change the "interface version"
parameter sent from Kannel to a
value other then 0x34 (for SMPP
v3.4). the value entered here
should be the hexadecimal
representation of the interface
version parameter. for example,
the default (if not set) is "34"
which stands for 0x34. for SMPP
v3.3 set to "33".
According to the SMPP 3.4 spec
this is supposed to affect which
MS's can send messages to this
account. Doesn't seem to work,
though.
Specicy the outgoing IP address
for connections from a
multi-homed machine. If this is
not defined the default device of
the machine will be used.
Optional smsc short number.
Should be set if smsc sends a
different one.
Optional the time lapse allowed
between operations after which
an SMPP entity should
interrogate whether it's peer still
has an active session. The default
is 30 seconds.
Optional the maximum number
of outstanding (i.e.
acknowledged) SMPP operations
between an ESME and SMSC.
This number is not specified
explicity in the SMPP Protocol
Specification and will be
goverened by the SMPP
implementation on the SMSC.
As a guideline it is recommended
that no more than 10 (default)
SMPP messages are outstanding
at any time.
39