Answer Or Reject A Call - Nokia 6131 User Manual

Voice commands are language-dependent. To set the language, see
Voice playback language
Note: Using voice tags may be difficult in a noisy environment or
during an emergency, so you should not rely solely upon voice dialing in
all circumstances.
1. In the standby mode, press and hold the right selection key or press
and hold the volume down key. A short tone is played, and
is displayed.
If you are using a compatible headset with the headset key, press and
hold the headset key to start the voice dialing.
2. Say the voice command clearly. If the voice recognition was
successful, a list with matches is shown. The phone plays the voice
command of the match on the top of the list. After about
1.5 seconds, the phone dials the number; or if the result is not the
correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is
similar to voice dialing. See

■ Answer or reject a call

To answer an incoming call, press the call key, or open the phone. To end
the call, press the end key or close the phone.
To reject an incoming call if the phone is open, press the end key. To
reject an incoming call when the phone is closed, press and hold a
volume key.
To mute the ringing tone, press a volume key when the phone is closed,
or select Silence when the phone is open.
Tip: If the Divert if busy
(for example, to your voice mailbox), rejecting an incoming call
also diverts the call. See "Call," p. 65.
If a compatible headset supplied with the headset key is connected to
the phone, to answer and end a call, press the headset key.
in "Phone," p. 66.
Voice commands
function is activated to divert the calls
C a l l f u n c t i o n s
Speak now
in "My shortcuts," p. 58.
23