Answer Or Reject A Call - Nokia 6125 User Manual

Voice commands are language-dependent. To set the language, see
Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely
solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is played, and
displayed.
If you are using a compatible headset with the headset key, press and hold the headset key to start the voice
dialing.
2. Say the voice command clearly. If the voice recognition is successful, a list with matches is shown. The
phone plays the voice command of the match on the top of the list. After about 1.5 seconds, the phone dials
the number; or if the result is not the correct one, scroll to another entry, and select to dial the entry.
Using voice commands to carry out a selected phone function is similar to voice dialing. See
commands in My shortcuts

■ Answer or reject a call

• Open the fold, or press the call key to answer the call. To mute the ringing tone, select Silence, if the fold is
open or if the fold is closed, press the volume up/down key.
• To reject an incoming call when the fold is open, press the end key.
If Divert if busy is activated in your voice mailbox, the call is forwarded to your voice mail. If not, the call is
rejected. If a compatible headset supplied with the headset key is connected to the phone, press the headset
key to answer and end a call.
Call waiting
Call waiting is a network service. To answer the waiting call during an active call, press the call key. The first
call is put on hold. To end the active call, press the end key.
To activate the Call waiting
p. 67.
function, see Call p. 74.
Copyright © 2006 Nokia. All rights reserved.
Voice playback language in Phone p. 75.
Speak now is
Voice
30