Hyundai WS 1728 Instruction Manual page 27

Radio Controlled Time:
• The clock automatically starts scanning the RF 433 MHz signal to register new thermo sensor
unit after new batteries inserted. After registered the thermo sensor or press "SEARCH"
button to stop scanning, The clock will then automatically starts scanning the DCF time signal
( flashes on the LCD)
• The clock automatically scans the time signal at 3:00a.m. everyday to maintain
accurate timing. For failed reception, scanning stops ( on LCD disappear) and repeats
again at 4:00a.m., 5:00a.m., and 6:00a.m.
• The clock manually scans the time signal by holding buttons "▲" & "▼ ". For failed reception,
scanning stops ( on LCD disappear) and repeats again in the next 4 hours (4 times) until
received. e.g. scan at 8:20 failed, it will received again at 9:00; 10:00; 11:00; 12:00.
• Stop scanning by holding "▲" & "▼" buttons.
* flashes indicate now is receiving the DCF signal
turns on indicate signal received successfully
Manual Time Setting:
• Press "MODE"(A) button to change the display content:
Radio Controlled Time
• When the Time is displayed on LCD, hold "MODE" (A) button for 2 seconds to enter
Time setting mode.
• Press or hold "▲" (C ) & "▼" (B) to adjust the Hour, Minutes, Time Zone, Year, Language
of week day, Year, Month and Day.
• Press "MODE" (A) button to confirm each setting
• The TIME SETTING mode will automatically exit in 8 sec without any adjustment.
Snooze Alarm Clock Function:
• Press "ALARM ON/OFF" (E) button to switch the alarm on „
• Press "MODE" button twice to turn to Alarm Time Display, hold "MODE" button 2 seconds
(Hr digit blink) to enter Alarm Time setting mode. Press "▲"(C) or "▼" (D) buttons to adjust
the Alarm Time.
• Press "SNOOZE/ PROJECTION/LIGHT" button (H) when alarm is alerted.
The alarm snoozes for 8 minutes, then it alerts again
• Press "ALARM ON/OFF"(E) button to switch off the alarm „
Thermometer:
• Press „▼ C/F" button (B) to select thermometer in Celsius/Fahrenheit mode
Time + week Alarm Time
EN - 27
" appears on the LCD.
" disappear)
EN