Table of Contents
Advertisement
Tip! If you have searched for devices earlier, a list
of the devices that were found previously is
shown first. To start a new search, select
devices. If you switch off the phone, the list is
cleared.
Device icons:
—Computer;
—Headset;
To interrupt the search, press Stop. The device list
freezes.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See
5
When the connection has been established,
data
is shown.
The
Sent
folder in
using a Bluetooth connection.
Tip! When searching for devices, some devices may
show only the unique addresses (device addresses).
To find the unique address of your phone, enter the
code *#2820# in the standby mode.
100
—Phone;
—Audio or video;
—Other.
"Pair
devices", p. 100.
Messaging
does not store messages sent
Copyright © 2005 Nokia. All rights reserved.
Pair devices
Glossary: Pairing means authentication. The users of
More
the two devices with Bluetooth technology should
agree on a common passcode, and use the same
passcode for both devices in order to pair them.
Devices that do not have a user interface have a
factory-set passcode.
In the
Bluetooth
devices view (
Before pairing, create your own passcode (1—16 digits),
and agree with the owner of the other device to use the
same code. The passcode is used only once.
To pair with a device, select
Sending
Devices with Bluetooth technology that are within range
start to appear on the display one by one. Select the device,
and enter the passcode. The same passcode must be
entered on the other device as well. After pairing, the
device is saved to the paired devices view.
Paired devices are indicated by
Tip! To define a short name (nickname or alias) for a
paired device, scroll to the device, and select
Options
view. This name helps you to recognise a certain
device during device search or when a device
requests a connection.
main view, press
to open the paired
).
Options
>
New paired
in the device search.
>
Assign short name
in the paired devices
device.
Advertisement
Table of Contents
