Nokia N90-1 User Manual page 43

• To make lighting and colour adjustments before taking
a picture, press the joystick, or select
setup > Scene, Flash, White
or Colour tone. See "Setup settings—Adjust colour and
lighting", p. 44.
• The quality of a zoomed picture is lower than that of a
nonzoomed picture.
• The camera goes into battery saving mode if there are
no key presses in a while. To continue taking pictures,
press the capture key.
After the image is taken, note the following:
• If you do not want to keep the image, select
Delete.
• To return to the viewfinder to take a new picture, press
the capture key halfway down.
• To send the image Via multimedia,
Bluetooth, select Options
information, see "Messaging", p.
connection", p. 98. This option is not available during
an active call.
• To send an image to the other party during an active
call, select Options > Send to
• To edit the picture, select
images", p. 47.
• To print the picture, select
print", p. 57.
Options > Image
balance, Exposure value,
Options
Via e-mail, or Via
> Send. For more
63 and "Bluetooth
caller.
Options > Edit. See "Edit
Options > Print. See "Image
Copyright © 2005 Nokia. All rights reserved.
Take pictures in a sequence
Select Options > Sequence mode
take six pictures in a sequence. You can also use the
sequence mode with the
the picture—self-timer", p. 43. The pictures are
automatically saved in Gallery.
To take the pictures, press and hold the capture key. If you
want to take less than six pictures, release the capture key
after the desired amount of pictures.
After taking the pictures, they are shown in a grid on the
main display. To view a picture, press the joystick to open
>
it.
To return to the sequence mode viewfinder, press the
capture key halfway down.
You in the picture—self-timer
Use the self-timer to delay the taking of a picture so that
you can include yourself in the picture. To set the
self-timer delay, select
seconds or 10 seconds. To activate the self-timer, select
Activate. The self-timer indicator (
device beeps when the timer is running. The camera takes
the picture after the selected delay has elapsed. You can
also use the Activate self-timer
See "Take pictures in a
to set the camera to
Activate self-timer. See
Options > Activate self-timer
) blinks and the
in the sequence mode.
sequence", p. 43.
"You in
> 2
43