Connection Settings - Nokia N90-1 User Manual

Nokia cell phone user guide
Table of Contents

Advertisement

Automatic
redial—Select On, and your phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press
.
Summary after
phone to briefly display the approximate duration of the
last call.
Speed
dialling—Select On, and the numbers assigned to
the speed dialling keys ( -
and holding the key. See also
p. 27.
Anykey
answer—Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
,
,
, and
Line in use
(
card supports two subscriber numbers, that is, two phone
lines. Select which phone line you want to use for making
calls and sending text messages. Calls on both lines can be
answered irrespective of the selected line. If you select
Line 2
and have not subscribed to this network service, you
will not be able to make calls. When line 2 is selected,
is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold
in the standby mode.
108
call—Activate this setting if you want the
) can be dialled by pressing
"Speed dial a phone
.
)—This setting is shown only if the SIM
Copyright © 2005 Nokia. All rights reserved.
Line change
(
change
>
Disable
this setting, you need the PIN2 code.

Connection settings

Data connections and access points
Your phone supports packet data connections ( ), such as
GPRS in the GSM network.
number",
Glossary: General packet radio service (GPRS) uses
packet data technology where information is sent in
short packets of data over the mobile network.
To establish a data connection, an access point is required.
You can define different kinds of access points, such as:
• MMS access point to send and receive multimedia
messages
• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the type of access point you need with your service
provider for the service you wish to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
)—To prevent line selection, select
if supported by your SIM card. To change
Line

Advertisement

Table of Contents
loading

Table of Contents