Pair Devices - Nokia N Series User Manual

1
Open the application where the item you want to send
is stored. For example, to send an image to another
compatible device, open Gallery.
2
Select the item and Options
Devices with Bluetooth technology within range start
to appear on the display.
Device icons are: computer,
video device, and other device.
To interrupt the search, select Stop.
3
Select the device with which you want to connect.
4
If the other device requires pairing before data can be
transmitted, a tone sounds, and you are asked to enter
a passcode. See 'Pair devices', p. 89.
5 When the connection has been established,
data is shown.
Sent in Messag. does not store messages sent using
Bluetooth connectivity.
Tip! When searching for devices, some devices may
show only the unique address (device address). To find
the unique address of your device, enter the code
*#2820# in the standby mode.

Pair devices

To open the paired devices view (
application main view, press
> Send > Via Bluetooth.
phone, audio or
Sending
), in the Bluetooth
.
Before pairing, create your own passcode (1-16 digits),
and agree with the owner of the other device to use the
same code. Devices that do not have a user interface have
a factory-set passcode. The passcode is used only once.
To pair with a device, select
device. Devices with wireless Bluetooth technology within
range start to appear on the display. Select the device, and
enter the passcode. The same passcode must be entered
on the other device as well. After pairing, the device is
saved to the paired devices view.
Paired devices are indicated by
To set a device as authorized or unauthorized, scroll to a
device, and select from the following options:
Set as authorised—Connections between your device and
this device can be made without your knowledge. No
separate acceptance or authorization is needed. Use this
status for your own devices, such as your compatible
headset or PC, or devices that belong to someone you
trust. indicates authorized devices in the paired
devices view.
Set as unauthorised—Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete. If you want to cancel all pairings, select
Options > Delete all.
Copyright © 2007 Nokia. All rights reserved.
Options > New paired
in the device search.
89