Date And Time; Security - Nokia N90-1 User Manual

Access point—The access point name is needed to use your
phone as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in Configurations.

Date and time

See "Clock settings", p. 15.
See also the language settings in "General", p. 106.

Security

Phone and SIM
PIN code request—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See
lock codes", p. 112.
PIN code, PIN2 code, and
lock code, PIN code, and PIN2 code. These codes can only
"Glossary of PIN and
Lock code—You can change the
Copyright © 2005 Nokia. All rights reserved.
include the numbers from 0 to 9. See
lock codes", p. 112.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period—You can set an autolock period, a
time-out after which the phone automatically locks and
can be used only if the correct lock code is entered. Enter
a number for the time-out in minutes, or select
turn off the autolock period.
To unlock the phone, enter the lock code.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the phone manually, press
commands opens. Select
Lock if SIM changed—You can set the phone to ask for the
lock code when an unknown SIM card is inserted into your
phone. The phone maintains a list of SIM cards that are
recognised as the owner's cards.
Closed user group ( )—You can specify a group of
people to whom you can call and who can call you.
"Glossary of PIN and
None to
. A list of
Lock phone.
111