Preventing Accidental Erasure - Image Protection - Sony DCR-TRV720 Operating Instructions Manual

Preventing accidental erasure
– Image protection
To prevent accidental erasure of important images, you can protect selected images.
Before operation
Insert a "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY or VTR. Make sure that the LOCK is set to
(2) Play back the image you want to protect (p. 90).
(3) Press MENU to make the menu display appear.
(4) Turn the SEL/PUSH EXEC dial to select
(5) Turn the SEL/PUSH EXEC dial to select PROTECT, then press the dial.
(6) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(7) Press MENU to erase the menu display. The - mark is displayed beside the
3,7
MENU
To cancel image protection
Select OFF in step 6, then press the SEL/PUSH EXEC dial.
Note
Formatting erases all information on the "Memory Stick", including the protected
image data. Check the contents of the "Memory Stick" before formatting.
If the write-protect tab on the "Memory Stick" is set to LOCK
You cannot carry out image protection.
98
the right (unlock) position.
data file name of the protected image.
4
5
6
, then press the dial.
1
MEMORY SET 21 / 40
CONT I NUOUS
QUAL I TY
FLD . / FRAME
PR I NT MARK
PROTECT OFF
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
MEMORY SET
CONT I NUOUS OFF
QUAL I TY
FLD . / FRAME
PR I NT MARK
PROTECT
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
MEMORY SET
CONT I NUOUS
QUAL I TY
FLD . / FRAME
PR I NT MARK
PROTECT ON
SL I DE SHOW OFF
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
MEMORY SET 21 / 40
CONT I NUOUS
QUAL I TY
FLD . / FRAME
PR I NT MARK
PROTECT
ON
SL I DE SHOW
DELETE ALL
FORMAT
RETURN
[ MENU ] : END
21 / 40