Sony DCR-TRV720 Operating Instructions Manual page 117

Making prints – Standard print
Printing images on which superimposed a still image by using
MEMORY MIX function
Before operation
• Be sure to use a fully charged battery when using the battery to make prints.
• Insert a recorded "Memory Stick" into your camcorder.
(1) Insert the print cartridge. (p. 105)
(2) Set the POWER switch to MEMORY . Make sure that the LOCK is set to the
light (unlock) position.
(3) Press MEMORY MIX.
The last recorded still image on "Memory Stick" appears on the lower part of
the screen as a thumbnail image.
(4) Press MEMORY +/– to select the still image you want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press MEMORY +.
(5) Turn the SEL/PUSH EXEC dial to select the desired mode, then press the dial
to set.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(6) Press the SEL/PUSH EXEC dial.
The still image is super imposed on the moving image.
Turn the SEL/PUSH EXEC dial to adjust the effect. (p. 84)
(7) Open the LCD panel and the printer cover, then make sure that the PRINT
PAPER lamp is flashing slowly. Insert the print paper. (P. 108)
(8) Perform steps 4 to 7 on page 111.
3
MEMORY MIX
M. CHROM
100–0021
Still image
4
If you press PHOTO after step 6
You can record the image on "Memory Stick."
2
5
6
M. LUMI
100–0021
M. LUMI
100–0021
117