Sony DCR-TRV720 Operating Instructions Manual page 87

Recording an image from a tape as a still image
Recording a still image from other equipment
(1) Set the POWER switch to VTR and set DISPLAY to LCD in the menu settings.
(2) Play back the recorded tape, or turn the TV on to see the desired program.
The image from TV or VCR appear on the LCD or in the viewfinder.
(3) Follow the steps 3 and 4 on page 86.
Using the A/V connecting cable
TV
VCR
: Signal flow
Connect the yellow plug of the A/V connecting cable to the video jack on the VCR or
the TV.
If your TV or VCR has an S video jack
Connect using an S video cable (not supplied) to obtain high-quality pictures
With this connection, you do not need to connect the yellow (video) plug of the A/V
connecting cable.
Connect an S video cable (not supplied) to the S video jacks of both your camcorder and
the TV or the VCR.
Using the i. LINK cable (DV connecting cable)
DV
DV OUT
: Signal flow
OUT
AUDIO / VIDEO
S VIDEO
VIDEO
S VIDEO LANC
(not supplied)
S VIDEO
DV IN/OUT
87