Sony DCR-TRV720 Operating Instructions Manual page 38

Using special effects – Digital effect
(1) Press DIGITAL EFFECT in CAMERA mode. The digital effect indicator
(2) Turn the SEL/PUSH EXEC dial to select the desired digital effect mode.
(3) Press the SEL/PUSH EXEC dial. The indicator lights up and the bars appear.
(4) Turn the SEL/PUSH EXEC dial to adjust the effect as follows:
1
DIGITAL
EFFECT
2
To cancel the digital effect
Press DIGITAL EFFECT.
38
appears.
The indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL y SLOW SHTR y OLD MOVIE
In the STILL and LUMI. modes, the still image is stored in memory.
STILL – The rate of the still image you want to superimpose on the moving
image
FLASH – The interval of flash motion
LUMI. – The color scheme of the area in the still image which is to be
swapped with a moving image
TRAIL – The vanishing time of the incidental image
SLOW SHTR – Shutter speed. The larger the shutter speed number, the
slower the shutter speed.
OLD MOVIE – No adjustment necessary
The more bars there are on screen, the stronger the digital effect. The bars
appear in the following modes: STILL, FLASH, LUMI. and TRAIL.
LUMI.
3
4
LUMI.